A.liquid
B.dry saturated gas
C.wet saturated gas
D.superheated vapor
您可能感興趣的試卷
你可能感興趣的試題
A.closed, and no leakage permitted across the shaft packing
B.closed, and only slight leakage permitted across the shaft packing
C.open, and no leakage permitted across the shaft packing
D.open, and only slight leakage permitted across the shaft packing
A.freezing point
B.floc point
C.condensing temperature
D.compression temperature
A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer
A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side
A.maintain adequate coil back pressure
B.prohibit flashing in the liquid line
C.reduce refrigerant volume in the system
D.reduce compressor discharge line loading
最新試題
One cause of high head pressure occurring in a refrigeration system can be （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
A pressure drop through the refrigerant liquid line may cause （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
Which of the following statements is correct concerning heat transfer?（）