A.insufficient cooling water flow to the condenser
B.a low refrigerant charge in the system
C.the liquid valve is open too much
D.high evaporator superheat
您可能感興趣的試卷
你可能感興趣的試題
A.dead band action
B.neutral zone action
C.range
D.on-off action
A.cavitation
B.electrolysis
C.abrasion
D.corrosion
A.the relief valve should open before the high pressure cutout
B.the relief valve should open and allow the excess refrigerant to flow to the receiver
C.the high pressure cutout switch should operate before the relief valve opens
D.you should close in on the suction valve
A.cause of salt contamination
B.location of salt water contamination
C.chemical makeup of feed-water
D.level of alkalinity in condensate
A.restriction in refrigerant piping
B.air and non-condensable gases in the condenser
C.water in the refrigerant
D.flooding back of liquid refrigerant from the evaporator
最新試題
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
If the suction pressure at the refrigeration compressor is below normal, the cause can be（）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
A salinity indicator is used to determine the （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.