A.closed, and no leakage permitted across the shaft packing
B.closed, and only slight leakage permitted across the shaft packing
C.open, and no leakage permitted across the shaft packing
D.open, and only slight leakage permitted across the shaft packing
您可能感興趣的試卷
你可能感興趣的試題
A.freezing point
B.floc point
C.condensing temperature
D.compression temperature
A.the circuit breaker
B.for leaks in the suction piping
C.relief valve is not properly seated
D.the suction strainer
A.increase the refrigerating effect, by decreasing the amount of flash gas
B.allow the refrigerant to enter the throttling device in a saturated condition
C.increase the refrigerating effect by increasing the amount of flash gas
D.minimize the temperature drop of the liquid as it passes through the solenoid valve to the outlet side
A.maintain adequate coil back pressure
B.prohibit flashing in the liquid line
C.reduce refrigerant volume in the system
D.reduce compressor discharge line loading
A.maintaining a steadier speed
B.delivering liquids over greater distances
C.operating for longer periods of time
D.producing a smoother discharge flow
最新試題
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of ().
Which of the following statements is correct concerning heat transfer?()
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
The major source of chemical contaminants in hydraulic fluid is ().
A salinity indicator is used to determine the ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().