A.constantly decreasing as engine load increase
B.constantly increasing as the amount of supercharging increases
C.approximately equal to exhaust manifold pressure at all times
D.approximately equal to atmospheric pressure at all times
您可能感興趣的試卷
你可能感興趣的試題
A.prolonged maintenance intervals
B.improved atomization
C.greater fuel economy
D.incomplete combustion
A.greater than the average exhaust manifold pressure
B.less than the average exhaust manifold pressure
C.greater at the turbine wheel than at the impeller
D.greater at reduced engine speed
A.loss of additives from the lube oil
B.carbon deposits in the lube oil
C.excessive centrifuging
D.excessive fuel dilution
A.erosion and cratering of the nozzle orifices
B.fuel leakage into the nozzle drain line
C.fuel leakage before and after injection
D.insufficient fuel delivery though that nozzle
A.check cylinder lubrication
B.connect the pressure indicator pressure
C.test cylinder heads
D.connect the exhaust gas pyrometers
最新試題
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Cold weather starting of a diesel engine may be made easier by（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Diesel engine air start system check valves are opened by （）
Which of the following items don’t belong to dock repair works?（）
The main purpose of port State control is not to（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
The shipboard oil pollution emergency plan will be invalid after （）