A.check cylinder lubrication
B.connect the pressure indicator pressure
C.test cylinder heads
D.connect the exhaust gas pyrometers
您可能感興趣的試卷
你可能感興趣的試題
A.At zero load the intake manifold pressure is greater than the exhaust manifold pressure
B.At full load the intake manifold pressure and exhaust manifold pressure are equal
C.At full load the intake manifold pressure is less than the exhaust manifold pressure
D.At full load the intake manifold pressure is greater than the exhaust manifold pressure
A.increasing cooling water flow
B.increasing lube oil flow
C.dilution by fuel oil
D.adding SAE 70 oil
A.engine power losses
B.smoking due to unburned fuel
C.high exhaust temperature readings
D.all of the above
A.incorrect replacement of barrels and plungers of jerk pumps
B.overheating of the nozzle orifices
C.cracked pump housings
D.dirt in the fuel
A.tachometer
B.pyrometer
C.dynamometer
D.calorimeter
最新試題
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Which of the following items don’t belong to dock repair works?（）
The cetane rating of diesel fuel is an indication of the （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）