A.erosion and cratering of the nozzle orifices
B.fuel leakage into the nozzle drain line
C.fuel leakage before and after injection
D.insufficient fuel delivery though that nozzle
您可能感興趣的試卷
你可能感興趣的試題
A.check cylinder lubrication
B.connect the pressure indicator pressure
C.test cylinder heads
D.connect the exhaust gas pyrometers
A.At zero load the intake manifold pressure is greater than the exhaust manifold pressure
B.At full load the intake manifold pressure and exhaust manifold pressure are equal
C.At full load the intake manifold pressure is less than the exhaust manifold pressure
D.At full load the intake manifold pressure is greater than the exhaust manifold pressure
A.increasing cooling water flow
B.increasing lube oil flow
C.dilution by fuel oil
D.adding SAE 70 oil
A.engine power losses
B.smoking due to unburned fuel
C.high exhaust temperature readings
D.all of the above
A.incorrect replacement of barrels and plungers of jerk pumps
B.overheating of the nozzle orifices
C.cracked pump housings
D.dirt in the fuel
最新試題
Which of the following items don’t belong to dock repair works?()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
The condensers located in various stages of a flash evaporator are cooled by()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
() is not installed on the main switchboar.
Under MARPOL Code the ship to which it applies has to carry ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()