A.leaking discharge valve
B.jammed suction valve
C.tripped overload relay
D.broken discharge un-loader
您可能感興趣的試卷
你可能感興趣的試題
A.Liquids should never be transferred between tanks without consulting the dock master
B.If sea valves have been disassembled, all bonnets must be checked for leakage when the ship is re-floated
C.Before re-floating, all sea chest strainers should be verified as having been replaced
D.All of the above
A.In order for a fluid to be pumped, a fluid must be made to flow
B.A substance must be cold in order for it to be pumped
C.The kinetic energy imparted by the pump can be used to force a liquid through a hydraulic system
D.A pump must receive its energy from an external source
A.one size smaller than the pump suction nozzle
B.the same size as the pump suction nozzle
C.one size larger than the pump suction nozzle
D.installed with a short radius elbow at the pump
A.first stage flash chamber
B.second stage flash chamber
C.first stage after condenser
D.second stage distilling condenser
A.system is low on refrigerant
B.high pressure cutout switch is improperly adjusted
C.discharge valves are leaking slightly
D.discharge valves are leaking excessively
最新試題
One cause of high head pressure occurring in a refrigeration system can be ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by ().
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?()
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
The rate of heat transfer from a hot region to a cold region is affected most by the ().
If the head pressure of a reciprocating refrigeration compressor is excessive, ().
Which of the problems listed would came the discharge temperature of an R-12 refrigeration compressor to increase?()
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
The usual symptoms of cavitation in a centrifugal pump is ().