A.ignition temperature
B.flash point
C.flammable range
D.convection index
您可能感興趣的試卷
你可能感興趣的試題
A.freeze on the expansion valve seat and reduce the flow of liquid refrigerant
B.emulsify the oil in the condenser
C.freeze in the king valve
D.clog the oil trap
A.The colder seawater passing through the condenser tube bundles of the various stages increases evaporator vacuum
B.The amount of heated feed water discharged from the feed water heater after cndenser is increased
C.Fewer non-condensable gases are created by the flow of colder seawater
D.More seawater is allowed to pass through the flint stage overflow weir
A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
最新試題
A salinity indicator is used to determine the ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
When the steering gear is in operation, you should ().
The major source of chemical contaminants in hydraulic fluid is ().
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?()
The output volume of a positive fixed displacement pump can be changed only by ().
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is ().
The usual symptoms of cavitation in a centrifugal pump is ().
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().