A.bleeding refrigerant from the condenser
B.opening a drain petcock on the oil separator
C.condensing the water in the heat exchanger
D.using a dehydrator cartridge
您可能感興趣的試卷
你可能感興趣的試題
A.drill holes through the heavy side of the impeller until it balances
B.weld counterweights to the light side of the impeller
C.remove metal from the heavy side by machining in a lathe
D.acid wash and serape the heavy side until it balances
A.cause loss of hydraulic oil from the system
B.result in extreme damage to the pump
C.cause damage to the pump ff not continually drained from the pump casing
D.result in the system high side pressure to substantially drop off
A.saltwater heater shell
B.second-stage condenser
C.atmosphere
D.second-stage flash chamber
A.Ash content, carbon residue, and gravity
B.Viscosity, acidity, and demulsibility
C.Pour point, flash, point, and precipitation number
D.Auto-ignition point, viscosity index, and film strength
A.Protects against suction valve float
B.Provides a positive pressure on the air inlet valves
C.Prevents lubricating oil contamination of the compressed air supply
D.Protects against the damaging effects of airborne solid particles
最新試題
A salinity indicator is used to determine the ().
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump ().
If the thermal bulb of an expansion valve is incorrectly placed at the center of the coil instead of the end, it will ().
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its ().
The control mode in which the final control element is moved from one of two flexed positions to the other is known as ().
A grease gun is generally used to lubricate a ().
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by ().
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be ().
The usual symptoms of cavitation in a centrifugal pump is ().
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?()