翻譯：This chapter deals with the fundamental properties of reservoir rocks. The properties discussed are (1) porosity - a measure of the void space in a rock; (2) Permeability - a measure of the fluid transmissivity of a rock; and (3) fluid saturation - a measure of the gross void space occupied by a fluid. These properties constitute a set of fundamental parameters by which the rock may be described quantitatively.

翻譯：the fluid must be identified by direct measurement of certain properties. These measurements involve securing samples of the fluids from the field. The simplest procedure is to make measurements of the properties of the produced fluids. The API gravity of stock-tank oil and the producing gas-oil ratio are routinely determined. The gas-oil ratio is ordinarily the ratio of volume, in standard cubic feet, of gas from the separator to the volume of stock tank oil both measured over the same time interval. If good field practice is followed, the gravity of the separator gas is determined. These data, together with estimates or observations of the reservoir pressure and temperature, can be used to estimate the properties of the reservoir fluids. Such estimates may be of limited accuracy.

翻譯：The need for a greater understanding of the pumping process and for the ability to engineer pump installations to a close degree of tolerance is being accentuated by the trend to pump from greater and greater depths . Problems are relatively minor when the pump is at 10,000 ft.

翻譯：The application of physics to the study of rocks (geophysics)is very important in petroleum geology. In its broadest application geophysics makes a major contribution to understanding the earths crust and, especially through the application of modern plate tectonic(板塊構(gòu)造)theory, the genesis and petroleum potential of sedimentary basins. More specially, physical concepts are required to understand folds（褶皺）, faults（斷層）, and diapers（底辟）, and hence their roles in petroleum entrapment.

翻譯：Other additives are often added to the fracturing fluids for special proposes. Corrosion inhibitors may be used if the fracturing fluids might cause corrosion in the tubular goods in the well.Other additives are used to make the part of the fracturing fluid which is moving against the pipe walls behave almost like lubricating oil while the remaining fracturing fluid take an almost solid form to carry the maximum amount of proppant.