Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface PortChannel13
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface PortChannel23
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 10!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 10!
The Fault Condition is related to which technology？（）
A.VLAN
B.InterVLAN communication
C.DHCP
D.Switch to Switch Connectivity
您可能感興趣的試卷
你可能感興趣的試題
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
What is the solution of the fault condition？（）
A.Given an IP address to VLAN 1 on DSW1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue switchport access vlan 10 command on interfaces fa1/0/1 and fa1/0/2 on ASW1
D.Give static IP addresses to Client 1 and Client 2
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
The Fault Condition is related to which technology？（）
A.VLAN
B.InterVLAN communication
C.DHCP
D.Port Security
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital troubleshootingshows that port Fa1/0/1 on ASW1 is in errdisable state.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport port-security
switchport port-security mac-address 0000.0000.0001
What is the solution of the fault condition？（）
A.Configurationure Static IP Address on Client 1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue shutdown command followed by no shutdown command on port fa1/0/1 on ASW1
D.Issue no switchport port-security mac-address 0000.0000.0001 command followed by shutdown and noshutdown command on port fa1/0/1 on ASW1
E.Issue no switchport port-security mac-address 0000.0000.0001 command on port fa1/0/1 on ASW1
最新試題
Router NetworkTut is configured as shown below：Given the above configuration， which statement is true？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Study the exhibit carefully.Routers A and B are customer routers. Routers 1， 2， 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）