2012 Feb 23 23：00：08.676710 pim： [16132] （default-base） Received unauthenticated hello- message from 10.1.1.2 on Ethernet1/18， message discarded 2012 Feb 23 23：00：12.528763 pim： [16132] （default-base） Send Hello with AH on Ethernet1/18 from 10.1.1.1， holdtimE. 105 secs，dr-priority：1
You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1/18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debug output？（）
A. The peer router 10.1.1.2 has PIM disabled on its interface connecting to Ethernet1/18.
B. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting to Ethernet1/18.
C. The local router 10.1.1.1 has the wrong PIM password configured on Ethernet1/18.
D. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting to Ethernet1/18.
E. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18.
您可能感興趣的試卷
你可能感興趣的試題
A. The supervisor module enforces CoPP before out-of-policy traffic reaches the CPU
B. The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPU
C. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPU
D. The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches the CPU
A. on all ingress interfaces； to ensure maximum throughput on a per-egress， per-CoS basis
B. on all ingress interfaces； to provide independent congestion management and 16 queues
C. on all egress interfaces； so that a congested egress port does not affect traffic directed to other egress ports
D. on all egress interfaces； to prevent head-of-line blocking by utilizing multiple virtual output queues
E. on all egress interfaces； to be able to use EEE 802.1p CoS
A. VRRP does not work with vPC due to industry standard requirements
B. VRRP works with vPC in traditional active/standby modes
C. VRRP works with vPC in an active/active mode
D. VRRP work with vPC as long as vPC peer-gateway is configured to address non-standard replies to the physical MAC address
A. It enables MAC ACLs to be applied to only IP packets that enter the interface.
B. It enables MAC ACLs to be applied to only non-IP packets that enter the interface.
C. It enables MAC ACLs to be applied to all packets that enter the interface.
D. It enables MAC ACLs to be used for QoS settings.
A. EPLD upgrade， IOS ISSU， FCoE feature enablement， CoPP configuration， and rolling back a checkpoint
B. EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and ACL capture enablement
C. EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration and SNMP configuration
D. EPLD upgrade， Cisco IOS ISSU， FCoE feature enablement， CoPP configuration， and write erase
最新試題
Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true？ （）
An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error （Refer to the exhibit）.What is the cause of this error？（）
Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
When testing ICMP access to a functional load-balancing ACE VIP， it fails. What is the reason of this problem？ （）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector， to report virtual IP and real server availability. Which statement is true about KAL-AP？（）
What is the use of an "all configuration" backup in Cisco UCS？（）
Application Control Engine （ACE） can check the health of servers and server farms by configuring health probes （which are sometimes referred to as keepalives）. A probe can be one of many types. Which are valid ACE probes？ （）