A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
B. Can only be used on the fabric interconnect on which it was created
C. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information
D. Can be used to match firmware versions between 6120 and 6140 during a migration
您可能感興趣的試卷
你可能感興趣的試題
A. They are created automatically and stored on the FI
B. They are created manually and exported to a remote server
C. They are automatically scheduled to run every 24 hours
D. They are manually scheduled and stored on the FI
A. During the initial configuration from the console
B. Once the basic configuration has been applied
C. To restore the configuration on a secondary fabric interconnect
D. To upgrade the firmware on a replacement fabric interconnect
A. Only to Cisco Fibre Channel switches
B. Only to Cisco Fibre Channel switches in NPIV mode
C. To any Fibre Channel switch
D. Directly to storage arrays
E. Only to Nexus Switches
A. Under the Admin tab on the FI
B. Under the Server tab in the service profile
C. Under the SAN tab on each VSAN
D. Under the Admin tab on the chassis
E. Under the SAN tab on the Fabric Interconnect
Given the following output：
san-port-channel 12 is up
Hardware is Fibre Channel
Port WWN is 24：0c：00：0d：ec：d3：5c：00
Admin port mode is NP， trunk mode is on
Port mode is NP Port vsan is 1
Speed is 8 Gbps
Member[1] ： fc2/3
Member[2] ： fc2/4
What does "Speed is 8 Gbps" indicate？（）
A. The speed of the slowest interface in the port channel
B. The combined speed of all interfaces configured in the port channel
C. The combined speed of all interfaces in the port channel that are up
D. The speed that can be achieved if all buffers are used
最新試題
In a Cisco Unified Computing System， What is the "designated receiver" port in end-host mode used for？（）
Which of the following are supported in Cisco Global Site Selector？ （）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
On a Cisco Unified Computing System （UCS）， which two statements regarding Ethanalyzer are true？（）
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
Refer to the exhibit.The Cisco UCS domain is operating in switching mode. A network administrator notices that no traffic is traversing the uplinks on Fabric Interconnect B （Path C）. Which actions might be used to change this behavior？（）
From the Cisco UCS CLI， how do you verify which uplink ports a blade server is using for its network connectivity？（）
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）