A.reduce the draft of the barge
B.shorten one leg of the bridle
C.place bulky deck loads as far aft as possible
D.trim the barge down by the bow
您可能感興趣的試卷
你可能感興趣的試題
A.Frequent stability calculations required
B.Thorough pre-planning required
C.Limiting depths alongside berths restrict barge drafts
D.Minimum trim and 0°list are required for optimum operations
A.expected towing forces
B.capability of retrieving gear
C.freeboard of the unit being towed
D.need to reduce yaw
A.trim the tow by the bow
B.trim the tow by the stern
C.list the tow to windward
D.adjust the length of the towing bridle
A.Two to four feet by the bow
B.Slightly by the bow
C.No trim should be permitted
D.Slightly by the stern
A.liquid commodities in containers
B.bottled liquid commodities
C.common liquid commodities in bulk
D.liquid commodities in cylinders
最新試題
Sea water temporarily pumped into tanks to simulate the increased vertical loading of environmental forces is termed().
Large quantities of uncovered pig iron or billets should not be carried in the upper-tween decks because().
The safe working load for the assembled cargo gear and the minimum angle to the horizontal for which the gear is designed shall be marked on the().
A vessel has an amidships superstructure. Which location would be most suitable for on-deck stowage of automobiles?().
Prior to backloading portable tanks or drums onto an offshore supply vessel,check that each tank is().
Ullages on tankers are measured from().
What additional precautions should be taken when making temporary repairs to a ship that is operating when hydrogen sulfide is present?()
To determine which grades of cargo a tanker is permitted to carry you should().
The pneumatic containers which store bulk dry mud additives and cement on a ship are called().
Cargo that is suitable for carriage on Ro-Ro vessels includes().