A.The cylinder indicator cocks should be opened
B.The sump lube oil scavenge pump should be secured immediately
C.The explosion relief valves should be manually opened
D.The crankcase should remain unopened until the engine has cooled
您可能感興趣的試卷
你可能感興趣的試題
A.turbocharger malfunction or failure
B.crankcase exhauster overload
C.overload on the intercooler
D.obstruction in the engine cylinders
A.inspection covers should not be opened until the engine has cooled
B.ventilation system should be continued in operation for one hour for cooling
C.scavenge pump should be immediately secured to prevent loss of lube oil
D.explosion covers should be opened slightly to provide extra ventilation
A.high flash point and high viscosity
B.low flash point and high viscosity
C.low heating value and high sulphur content
D.high heating value and low sulphur content
A.Full power cannot be developed
B.The exhaust will contain black smoke
C.Complete combustion will be impossible
D.All of the above
A.immediately open all crankcase relief ports
B.increase crankcase exhauster speed to draw cool air into the engine
C.allow the engine to cool naturally
D.increase crank case scavenge air to remove unburned gases
最新試題
The treatment of the fuel oils involves storage, heating, filtering and()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Under MARPOL Code the ship to which it applies has to carry ()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
If separating effect is not good, which measure should be taken ()
The condensers located in various stages of a flash evaporator are cooled by()