A.turbocharger malfunction or failure
B.crankcase exhauster overload
C.overload on the intercooler
D.obstruction in the engine cylinders
您可能感興趣的試卷
你可能感興趣的試題
A.inspection covers should not be opened until the engine has cooled
B.ventilation system should be continued in operation for one hour for cooling
C.scavenge pump should be immediately secured to prevent loss of lube oil
D.explosion covers should be opened slightly to provide extra ventilation
A.high flash point and high viscosity
B.low flash point and high viscosity
C.low heating value and high sulphur content
D.high heating value and low sulphur content
A.Full power cannot be developed
B.The exhaust will contain black smoke
C.Complete combustion will be impossible
D.All of the above
A.immediately open all crankcase relief ports
B.increase crankcase exhauster speed to draw cool air into the engine
C.allow the engine to cool naturally
D.increase crank case scavenge air to remove unburned gases
A.The coolant temperature must be maintained at 180℃
B.The thermostatic bypass valves must be manually opened before the engine is started
C.The pressure cap must be removed while the engine is secured
D.Electrical power to the heater must be secured before the cooling system is drained
最新試題
The ISPS Code consists of a mandatory section-Part A, which shows()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The treatment of the fuel oils involves storage, heating, filtering and()
() is not installed on the main switchboar.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
Which of the following items don’t belong to dock repair works?()
The condensers located in various stages of a flash evaporator are cooled by()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()