A.temperature of the exhaust gases
B.energy supplied to the turbocharger
C.air pressure to the intake manifold
D.purge of exhausted gases from the cylinders
您可能感興趣的試卷
你可能感興趣的試題
A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
A.formation of carbon on the intake and exhaust ports
B.high water jacket temperatures
C.overheated pistons and cylinders
D.an increase in lube oil viscosity due to fuel dilution
A.produce a scavenging effect in the combustion space
B.equalize cylinder and exhaust manifold pressures
C.alleviate the difference in valve size between the intake and exhaust
D.flush out condensate that collects after each compression stroke
A.high exhaust temperature and low firing pressure
B.high exhaust temperature and high firing pressure
C.low exhaust temperature and low firing pressure
D.low exhaust temperature and high firing pressure
最新試題
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The treatment of the fuel oils involves storage, heating, filtering and()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
Diesel engine air start system check valves are opened by ()
The ISPS Code consists of a mandatory section-Part A, which shows()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The condensers located in various stages of a flash evaporator are cooled by()
If separating effect is not good, which measure should be taken ()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()