A.increase in engine speed
B.increase in cylinder turbulence
C.leaking needle valve
D.reduction in cylinder turbulence
您可能感興趣的試卷
你可能感興趣的試題
A.check the air filter for dirt
B.check for an exhaust leak
C.check the cooling water temperature
D.notify the bridge that you are going to shut the engine down
A.formation of carbon on the intake and exhaust ports
B.high water jacket temperatures
C.overheated pistons and cylinders
D.an increase in lube oil viscosity due to fuel dilution
A.produce a scavenging effect in the combustion space
B.equalize cylinder and exhaust manifold pressures
C.alleviate the difference in valve size between the intake and exhaust
D.flush out condensate that collects after each compression stroke
A.high exhaust temperature and low firing pressure
B.high exhaust temperature and high firing pressure
C.low exhaust temperature and low firing pressure
D.low exhaust temperature and high firing pressure
A.cutting out individual injectors and noting engine performance
B.checking lube oil temperature
C.checking cam position
D.using a timing light
最新試題
The main purpose of port State control is not to()
The condensers located in various stages of a flash evaporator are cooled by()
Which of the following items don’t belong to dock repair works?()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Cold weather starting of a diesel engine may be made easier by()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()