A.excessive fuel oil temperature
B.long periods of engine overload
C.metallic contact between nozzles and cylinder heads
D.hard carbon deposit and varnish on the nozzles
您可能感興趣的試卷
你可能感興趣的試題
A.opposed to the crankshaft rocking couple
B.resonant with the crankshaft natural frequency
C.critical fore and aft crankshaft vibrations
D.horizontal whipping motions of the crankshaft
A.cylindrical in shape with service connections located at the top and bottom
B.opened and made available for inspection during biannual inspections provided
C.with automatic drain traps for the removal of moisture
D.so installed as to make the drain connections effective under extreme conditions of trim
A.Hydraulic stress and distortion will develop
B.Hot spots will develop
C.Fuel oil viscosity will increased
D.An increase in trapped deposits of scale and dirt
A.power and intake
B.intake and exhaust
C.exhaust and compression
D.compression and power
A.Hydraulic oil pressure
B.Servomotor action
C.Flyweight centrifugal force
D.Relay motion
最新試題
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the（）
The ISPS Code consists of a mandatory section-Part A, which shows（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.