A.quantity of fuel to be received
B.flash point of the fuel as it is received
C.fuel temperature as it is received
D.viscosity of the fuel being received
您可能感興趣的試卷
你可能感興趣的試題
A.close the static leg filling valve
B.close the overflow tank falling valve
C.reduce the fuel oil pumping rate
D.stop the fuel oil pumping operation
A.The pressure-vacuum relief valve should be reset
B.The tanks should be made seaworthy to prevent contamination
C.The tanks should be sounded to make sure the levels are not rising
D.The tanks should be marked with a bull stamp on the manifold filling valve
A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
A.Increased viscosity of the product needs higher loading pressure, which increases the chances of a spill
B.Air pockets may cause the fuel to bubble out of the ullage hole
C.The temperature rise of the fuel will cause an overflow
D.Fueling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened
最新試題
Using a file without a handle may result in （）
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to （）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The main purpose of port State control is not to（）
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The condensers located in various stages of a flash evaporator are cooled by（）
The shipboard oil pollution emergency plan will be invalid after （）