A.hose joints are made up
B.tanks are being topped off
C.system is being lined up
D.pumping operation is first started
您可能感興趣的試卷
你可能感興趣的試題
A.Reduce the pumping rate by closing the deck filling valve
B.Close all overflow valves
C.Place 5 gallon containers under all flange connections in the fuel line
D.Reduce the pumping rate and sound tanks frequently as the level rises
A.Increased viscosity of the product needs higher loading pressure, which increases the chances of a spill
B.Air pockets may cause the fuel to bubble out of the ullage hole
C.The temperature rise of the fuel will cause an overflow
D.Fueling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened
A.actuate an alarm and open the engine room control valve
B.actuate an alarm and open the engine room CO2 releasing valve
C.open the engine room control valve and shut off engine room ventilation fans
D.open the engine room control valve and then the CO2 releasing valve
A.to the bottom of the expansion trunk
B.to within 1% to 3% of its capacity
C.to within 1% to 3% inches of its capacity
D.1 to 3 inches from top of the vent pipe
A.draped over the fantail to dry out
B.drained over the side and washed out
C.drained into the bilges and washed out
D.drained into buckets or fuel tanks
最新試題
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
The cetane rating of diesel fuel is an indication of the ()
The condensers located in various stages of a flash evaporator are cooled by()
If separating effect is not good, which measure should be taken ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?()