A.Distiller air ejector cooling medium
B.Saltwater heater discharge
C.First-stage internal feed box
D.Second-stage internal feed box
您可能感興趣的試卷
你可能感興趣的試題
A.condenser
B.vapor generator
C.accumulator
D.evaporator
A.expansion valve to the compressor
B.receiver to the expansion coil
C.expansion valve to the evaporator
D.condenser to the expansion valve
A.leaking unloader
B.tripped circuit breaker
C.control line leak
D.defective pop valve
A.superheated
B.saturated
C.dense
D.flooded
A.a separate air ejector unit
B.a direct unimpeded connection between second stage and salt water feed heater
C.either by vacuum drag or an external line from the first stage via a fixed orifice
D.the fixed orifice provided in the steam supply line
最新試題
Pitting in the suction areas of a centrifugal pump bronze impeller is usually caused by （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
If you are given the job of adding hydraulic fluid to a mooring winch, and are not certain as to the type of fluid to use, you should （）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
When the steering gear is in operation, you should （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
The rate of heat transfer from a hot region to a cold region is affected most by the （）.