A.increase the flow of the cooling water through the condenser
B.adjust the high pressure cutout to maintain the desired pressure
C.open the hot gas bypass temporarily to reduce capacity
D.purge non-condensable gases to reduce the excess pressure
您可能感興趣的試卷
你可能感興趣的試題
A.Special tools are required for lapping or grinding
B.It is impossible to throttle flow with a butterfly valve
C.To close the valve, it is only necessary to turn the handle a quarter of a turn
D.The butterfly valve should never be used in a freshwater system
A.closely observe the pump discharge temperature
B.close off the discharge valve, and watch for a rise in pressure
C.momentarily close off the suction valve, and watch for a rise in pressure
D.use a clamp on ammeter and compare the readings to past records
A.removing all but the frictional load during starting
B.relieving intercoolers of high temperature buildups
C.providing high starting torque in the drive motor
D.seating valve plates during compressor shutdown
A.loose expansion valve control bulb
B.low differential setting on the H-Pcutout
C.blown fuse in the motor circuit
D.faulty suction pressure regulator
A.prevent an internal explosion in the pump when it is overheated
B.enable a visual inspection of the pump while it is running
C.insure a proper alignment of the pump coupling to the driver
D.accommodate for friction between the impeller and the easing
最新試題
A pressure drop through the refrigerant liquid line may cause （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
A gradual decrease in the discharge pressure of an operating hydraulic pump can be caused by （）.
An excessive charge of refrigerant in an air-cooled refrigeration system can cause （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
Thermostatic expansion valves can be adjusted for （）.
When a refrigeration compressor has developed a high head pressure as a result of a refrigerant overcharge, you should （）.
An increasing head pressure in a refrigeration system, without any corresponding change in the cooling water inlet temperature, would probably be caused by （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）