A.Both are higher than normal burning temperatures
B.The flash point is always higher
C.The ignition temperature is always higher
D.They are not necessarily related
您可能感興趣的試卷
你可能感興趣的試題
A.tend to twist about its long axis
B.expand in length and in diameter
C.contract in length and expand in diameter
D.flex at right angles to the applied pressure
A.holding the discharge valve open
B.relieving the intercooler pressure to the atmosphere
C.using an enlarged, permanently opened clearance expansion space
D.a pre-charged accumulator
A.within the space concerned
B.outside the space concerned
C.the throttle station
D.within the fire room
A.leaking discharge valve
B.jammed suction valve
C.tripped overload relay
D.broken discharge un-loader
A.Liquids should never be transferred between tanks without consulting the dock master
B.If sea valves have been disassembled, all bonnets must be checked for leakage when the ship is re-floated
C.Before re-floating, all sea chest strainers should be verified as having been replaced
D.All of the above
最新試題
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
Which of the following problems could cause the high pressure cutout switch to shut down the compressor in a refrigeration system?（）
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
A pressure drop through the refrigerant liquid line may cause （）.
Low compressor head pressure in a refrigeration system can be caused by（）.
The usual symptoms of cavitation in a centrifugal pump is （）.
When the steering gear is in operation, you should （）.
A grease gun is generally used to lubricate a （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
The rate of heat transfer between the hot and cold fluids passing through a shell-and-tube type heat exchanger will （）.