A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
您可能感興趣的試卷
你可能感興趣的試題
A.Surrounding the fixed shaft is a hollow shaft
B.This hollow shaft carries radial bores
C.Each bore is fitted with a well-lapped plunger
D.There are always even numbers of bores
A.The cylindrical barrel is coupled to the motor
B.The cylindrical barrel has an odd number of bores
C.The bores end in sockets
D.The sockets fit in the swash plate
A.The rams work inside cylinders
B.The cylinders have glands sealing their open ends
C.The rams are connected to a cross-head
D.The cross-head is mounted on the rudder stock
A.keep the air from being carried into the engine
B.keep the moisture from being condensed
C.keep the danger from being carded into the engine
D.take away the condensate from the air
Which of the following operations need to be entered on the Oil Record Book Part I? （）
(1) Ballast of fuel oil tanks
(2) Condition of oil discharge monitoring and control system
A.（1）only
B.（2）only
C.both（1）and（2）
D.neither（1）nor（2）
最新試題
Low compressor head pressure in a refrigeration system can be caused by（）.
The amount of fluid friction or internal friction inherent in a mineral lubricating oil is reflected as a measure of its （）.
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
The temperature differential occurring between the inlet temperature of the fluid to be cooled and the outlet temperature of the cooling medium in a shell-and-tube heat exchanger is greatest in which of the flow designs listed?（）
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
Heavy wear in a particular area of the inner circumference of a packing ring may be caused by （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
The output volume of a positive fixed displacement pump can be changed only by （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
On tank vessels equipped with power operated cargo tank valves, the type of power operator most commonly used is （）.