執行下面的兩條命令顯示如下：/* rtrv-ipport::acuenet:: */ "ACUENET:MANUAL:IPADDR=135.251.214.100,NETMASK=255.255.255.0,PHYADDR=00-07-72-ab-99-10"/* rtrv-ne-ALL::COM:: */"COM::MEMALM=\"RESET\",SHUTPREP=NOTREADY,DAYLIGHTSAVE=DISABLE,DEFROUTER=135.251.214.1,TZOFFSET=0,EPSSOAKINT=30000,CMDSSNTMO=150, SWRBALM=CLEAR,DBRBALM=CLEAR,AUTHSUPER=LOCAL,LANXMAC=00-07-72-ab-99-0e,AUTHDEF=REJECTALL,ACUSEC=DISABLED,SLIDMODE=ASCII,VOIPSCHEDMODE=DISABLED,SOAKMODE=DISABLE"此臺7342 OLT的網關地址是多少？

7342 OLT通過PPPoE方式實現IGMP，那么在LT中IGMP應配置何種模式？（）SET-PONIGMPSYS::COM::::QUERYINT=,QMAXRESTIME=,ROBUSTNESS=,SRCIPADDR=13.13.13.13,MODE=（）,USERVERSIONDEF=v2,NETWVERSIONDEF=v2;ENT-PONIGMPCHN::HSI-1-1-4-1-1-1-1-1::::USERVERSION=v2,USERPRI=4095,PERMDEC=3,PREVPERMDEC=2;SET-PONMCBW::PON-1-1-4-1:::600000;

7342 GPON通過命令REPT-OPSTAT-OSWP查看當前節點正在使用的OSWP是哪個？（）/* REPT-OPSTAT-OSWP::ALL */"OSWP-1:AVAILSTAT,ENABLED""OSWP-1:ACTSTAT,ACTIVE""OSWP-1:COMMITSTAT,COMMITTED""OSWP-2:AVAILSTAT,EMPTY""OSWP-2:ACTSTAT,NOTACTIVE""OSWP-2:COMMITSTAT,UNCOMMITTED"

7342 GPON通過什么命令可以將當前節點正在使用的OSWP committed？（）/* REPT-OPSTAT-OSWP::ALL */"OSWP-1:AVAILSTAT,ENABLED""OSWP-1:ACTSTAT,ACTIVE""OSWP-1:COMMITSTAT,UNCOMMITTED""OSWP-2:AVAILSTAT,EMPTY""OSWP-2:ACTSTAT,NOTACTIVE""OSWP-2:COMMITSTAT,UNCOMMITTED"

7360 show port(nt-a:xfp:1)后得到如下反饋Traffic Statistics===============================================================================Input Output-------------------------------------------------------------------------------Octets 0 0Packets 0 0Errors 0 0 以下說法正確的是：（）

登錄7302 cli，以下是命令show vlan fdb 120執行后的結果信息。============================================================fdb table============================================================vlanid mac port bridge-port status------------------------------------------------------------------------------------------------------------------------------------120 00:e0:8e:d1:ed:3a 1/1/4/20:0:35 52 learned------------------------------------------------------------------------------------------------------------------------------------fdb count : 1============================================================根據以上信息判斷，該VLAN 120上所學習到的MAC地址00:e0:8e:d1:ed:3a是（）。

登錄7302 cli，以下是命令info configure system shub執行后的結果信息。#-----------------------------------------------------------------------------------------------------------------------------------echo "system"#-----------------------------------------------------------------------------------------------------------------------------------sntpserver-ip-addr 61.139.37.226enableexitfiltershub-manager 1 src-ip-addr 61.139.37.226exitexitentryipdef-ip-addr 10.0.0.1/8def-gateway 10.0.0.3exitidcontactlocationexitsoftwaresw-ver-name LANXsw-release-num 1.0.0.1exitvlanext-vlan-id 4003exitexit#-----------------------------------------------------------------------------------------------------------------------------------根據以上信息判斷，該節點的管理VLAN是（）。

# configure la-agg-port 1 selection-policy mac-src actor-key 11 aggregatable aggregatable lacp-mode enable-lacp active-lacp passive-lacp# configure la-agg-port 5 selection-policy mac-src actor-key 11 aggregatable aggregatable lacp-mode enable-lacp active-lacp passive-lacp

在7300 FENT中執行命令show system ip，以下是結果信息。（）----------------- -------------------- -------------------device name IP address IP mask----------------- -------------------- -------------------Ethernet-PLIM 220.188.126.86 255.255.255.128ASAM 220.188.126.85default-gateway 220.188.126.1

配置優先級隊列模板，要求Pbit為0的數據包，映射到隊列1，權重最高;Pbit為1,2，3，4，5的數據包，映射到隊列2，權重最低；Pbit為6.7的數據包，映射到隊列3，不使用隊列。PQ1WEIGHT=（）,PQ2WEIGHT=（）,PQ3WEIGHT=（）,PQ4WEIGHT=256,PQ5WEIGHT=256,PQ6WEIGHT=256,PQ7WEIGHT=256,PQ8WEIGHT=256,DOT1P0PQ=1,DOT1P1PQ=2,DOT1P2PQ=2,DOT1P3PQ=2,DOT1P4PQ=2,DOT1P5PQ=2,DOT1P6PQ=3,DOT1P7PQ=3"