7342 GPON通過命令REPT-OPSTAT-OSWP查看當前節點正在使用的OSWP是哪個？（）/* REPT-OPSTAT-OSWP::ALL */"OSWP-1:AVAILSTAT,ENABLED""OSWP-1:ACTSTAT,ACTIVE""OSWP-1:COMMITSTAT,COMMITTED""OSWP-2:AVAILSTAT,EMPTY""OSWP-2:ACTSTAT,NOTACTIVE""OSWP-2:COMMITSTAT,UNCOMMITTED"

在7302 cli中執行命令show interface Shub port，部分結果如下。isadmin># show interface shub port============================================================port table============================================================port admin-status oper-status speed type duplex------------------------------------------------------------------------------------------1 up up ten-mbps network half2 up down one-gb network full3 down down one-gb unused full============================================================以下說法錯誤的是：（）。

7342 OLT通過PPPoE方式實現IGMP，那么在LT中IGMP應配置何種模式？（）SET-PONIGMPSYS::COM::::QUERYINT=,QMAXRESTIME=,ROBUSTNESS=,SRCIPADDR=13.13.13.13,MODE=（）,USERVERSIONDEF=v2,NETWVERSIONDEF=v2;ENT-PONIGMPCHN::HSI-1-1-4-1-1-1-1-1::::USERVERSION=v2,USERPRI=4095,PERMDEC=3,PREVPERMDEC=2;SET-PONMCBW::PON-1-1-4-1:::600000;

配置優先級隊列模板，要求Pbit為0的數據包，映射到隊列1，權重最高;Pbit為1,2，3，4，5的數據包，映射到隊列2，權重最低；Pbit為6.7的數據包，映射到隊列3，不使用隊列。PQ1WEIGHT=（）,PQ2WEIGHT=（）,PQ3WEIGHT=（）,PQ4WEIGHT=256,PQ5WEIGHT=256,PQ6WEIGHT=256,PQ7WEIGHT=256,PQ8WEIGHT=256,DOT1P0PQ=1,DOT1P1PQ=2,DOT1P2PQ=2,DOT1P3PQ=2,DOT1P4PQ=2,DOT1P5PQ=2,DOT1P6PQ=3,DOT1P7PQ=3"

登錄7302 cli，以下是命令info configure vlan執行后的部分結果信息。vlanbroadcast-framespriority-policy port-defaultid 1001 mode cross-connectexitshubid 1001 mode cross-connectegress-port lt:1/1/6exitegress-port network:4exitexitexitexit根據以上信息判斷，有關VLAN 1001，以下說法中錯誤的是（）。

登錄7302 cli，以下是命令info configure system shub執行后的結果信息。#-----------------------------------------------------------------------------------------------------------------------------------echo "system"#-----------------------------------------------------------------------------------------------------------------------------------sntpserver-ip-addr 61.139.37.226enableexitfiltershub-manager 1 src-ip-addr 61.139.37.226exitexitentryipdef-ip-addr 10.0.0.1/8def-gateway 10.0.0.3exitidcontactlocationexitsoftwaresw-ver-name LANXsw-release-num 1.0.0.1exitvlanext-vlan-id 4003exitexit#-----------------------------------------------------------------------------------------------------------------------------------根據以上信息判斷，該節點的管理VLAN是（）。

7342 GPON通過什么命令可以將當前節點正在使用的OSWP committed？（）/* REPT-OPSTAT-OSWP::ALL */"OSWP-1:AVAILSTAT,ENABLED""OSWP-1:ACTSTAT,ACTIVE""OSWP-1:COMMITSTAT,UNCOMMITTED""OSWP-2:AVAILSTAT,EMPTY""OSWP-2:ACTSTAT,NOTACTIVE""OSWP-2:COMMITSTAT,UNCOMMITTED"

7342 OLT通過IPoE方式實現IGMP，那么在LT中IGMP應配置何種模式（）？SET-PONIGMPSYS::COM::::QUERYINT=,QMAXRESTIME=,ROBUSTNESS=,SRCIPADDR=13.13.13.13,MODE=（）,USERVERSIONDEF=v2,NETWVERSIONDEF=v2;ENT-PONIGMPCHN::HSI-1-1-4-1-1-1-1-1::::USERVERSION=v2,USERPRI=4095,PERMDEC=3,PREVPERMDEC=2;SET-PONMCBW::PON-1-1-4-1:::600000;

# configure la-agg-port 1 selection-policy mac-src actor-key 11 aggregatable aggregatable lacp-mode enable-lacp active-lacp passive-lacp# configure la-agg-port 5 selection-policy mac-src actor-key 11 aggregatable aggregatable lacp-mode enable-lacp active-lacp passive-lacp

執行下面的兩條命令顯示如下：/* rtrv-ipport::acuenet:: */ "ACUENET:MANUAL:IPADDR=135.251.214.100,NETMASK=255.255.255.0,PHYADDR=00-07-72-ab-99-10"/* rtrv-ne-ALL::COM:: */"COM::MEMALM=\"RESET\",SHUTPREP=NOTREADY,DAYLIGHTSAVE=DISABLE,DEFROUTER=135.251.214.1,TZOFFSET=0,EPSSOAKINT=30000,CMDSSNTMO=150, SWRBALM=CLEAR,DBRBALM=CLEAR,AUTHSUPER=LOCAL,LANXMAC=00-07-72-ab-99-0e,AUTHDEF=REJECTALL,ACUSEC=DISABLED,SLIDMODE=ASCII,VOIPSCHEDMODE=DISABLED,SOAKMODE=DISABLE"此臺7342 OLT的地址是多少？