A.three
B.four
C.five
D.six
您可能感興趣的試卷
你可能感興趣的試題
A.1
B.5
C.10
D.15
A.50
B.128
C.512
D.1024
In a deployment using standalone access points， clients set up to authenticate with EAP-PEAP or EAP-Cisco Wireless （Cisco-LEAP） cannot authenticate. When you inspect the Failed Attempts report on theCisco Secure ACS， you find this error： "Unknown network access server NAS."
Which problem may havecaused this failure？（）
A.misconfigured EAP type on the access point
B.misconfigured EAP type on the AAA server
C.misconfigured IP address of the access point on the AAA server
D.misconfigured IP address of the AAA server on the access point
You are configuring a wireless LAN controller for QoS.
Which 802.11e user priority tag should you apply tovoice applications？（）
A.1
B.3
C.4
D.6
A.MS-CHAP v2
B.PAP
C.GTC
D.MD5
最新試題
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware.Before you press and hold the MODEbutton， you should verify that the file name is which of the following？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
You are configuring a wireless LAN controller for QoS.Which 802.11e user priority tag should you apply to voice applications？（）