A.disable auto rf and configure manually.
B.disable all 802.11b data rates.
C.power access point to full power.
D.hard code the channel.
您可能感興趣的試卷
你可能感興趣的試題
A.infrastructure devices to associate only to this ssid
B.enable ip redirection on this ssid
C.set data beacon rate
D.multiple basic service set identification （bssid）
E.set infrastructure ssid
A.eap-peap
B.eap-fast
C.eap-cisco wireless （leap）
D.eap-tls
E.eap-md5
A.15
B.10
C.1
D.5
You are conducting a cdp-based discovery using an edge switch for the seed. there is a router between the switch and the wlse. none of the access points are discovered， and the discovery log shows the switch is snmp unreachable.
What is the problem？（）
A.the snmp communities on the switch do not match the wlse.
B.the snmp communities on the access points do not match the wlse.
C.the snmp communities on the access points do not match the switch.
D.the snmp communities on the router do not match the wlse.
A.voip
B.rfid tags
C.data collection
D.802.11b and g clients
最新試題
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
A Cisco WCS version 4.0 has been installed on a server with a dual Pentium 3.0 GHz processor，4GB RAM， and an 80 GB hard drive. A location appliance has been incorporated into the networkand is being monitored by the Cisco WCS. There are 3000 devices to be tracked but not all of themare being tracked on the Cisco WCS.What can be done to correct the problem？（）
Which protocol does the RADIUS server use inside the secure tunnel of EAP-FAST to authenticatethe client when one-time passwords are in use？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）