Network topology exhibit：
You work as a network administrator at . You study the network topology exhibit carefully. is a small
company that has an existing enterprise network consisting of two switches named 1 and 2. The network topology schemata indicates their layer 2 mapping. VLAN 40 is a new VLAN that will be used to provide the shipping personnel access to the server. For security reasons， it is necessary to restrict access to VLAN 20 in the following manner：
Users connecting to 1’s port must be authenticate before they are given access to the network. Authentication is to be done via a Radius server：
Radius server host： 172.120.39.46
Radius key： key
Authentication should be implemented as close to the host device possible.
Devices on VLAN 20 are restricted to in the address range of 172.120.40.0/24.
Packets from devices in the address range of 172.120.40.0/24 should be passed on VLAN 20.
Packets from devices in any other address range should be dropped on VLAN 20. Filtering should be implemented as close to the server farm as possible.
The Radius server and application servers will be installed at a future date. You have been tasked with implementing the above access control as a pre-condition to installing the servers. You must use the available IOS switch features.
您可能感興趣的試卷
你可能感興趣的試題
A.32928 000d bd33 029b
B.24623 000f 34f5 039b
C.32928 000d bd03 029b
D.32768 000d bd33 029b
E.32769 000d 65db 01dd
F.32815 000d bd03 029b
G.None of the other alternatives apply
A.Listening
B.Learning
C.Disabled
D.Blocking
E.Forwarding
F.Discarding
G.None of the other alternatives apply
A.Root port
B.Nondesigned port
C.Designated port
D.Backup port
E.Alternate port
F.None of the other alternatives apply
A.32928 000d bd33 029b
B.24623 000f 34f5 039b
C.32928 000d bd03 029b
D.32768 000d bd33 029b
E.32769 000d 65db 01dd
F.32815 000d bd03 029b
G.None of the other alternatives apply
A.STP/IEEE 802.1D
B.MSTP/IEEE 802.1s
C.PVST+
D.PVRST
E.None of the other alternatives apply
最新試題
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port：00：06：34： %CDP-4-DUPLEX_MISMATCH： duplex mismatch discovered on FastEthernet0/5 （not half duplex）， with SW_A FastEthernet0/4 （half duplex） ， with TBA05071417（Cat6K-B） 0/4 （half duplex）. What would be the possible outcome of the problem？（）
Refer to the exhibit. Switch 15 is configured as the root switch for VLAN 10 but not for VLAN 20. If the STP configuration is correct， what will be true about Switch 15？（）
Refer to the exhibit. Based on the output of the show spanning-tree command， which statement is true？ （）
What must be the same to make multiple switches part of the same Multiple Spanning Tree （MST）？（）
What will occur when a nonedge switch port that is configured for Rapid Spanning Tree does not receive a BPDU from its neighbor for three consecutive hello time intervals？（）
During routine maintenance， G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However， after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ？ （）
Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivity throughout the network， Front Line users have been complaining that they experience slower network performance when accessing the server farm than the Reception office experiences. Based on the exhibit， which two statements are true？（）
Refer to the exhibit. What does the command channel-group 1 mode desirable do？ （）
Which statement is correct about RSTP port roles？（）
Refer to the exhibit. The command switchport mode access is issued on interface FastEthernet0/13 on switch CAT1. What will be the result？（）