A. T1
B. Frame Relay
C. DSL
D. PPP
E. ISDN
F. IPX
您可能感興趣的試卷
你可能感興趣的試題
A. IP address
B. encapsulation PPP
C. no shutdown
D. PPP authentication CHAP
E. Speed
F. None of the above
A. Needs to use Inverse ARP.
B. Maps a single IP subnet per DLCI.
C. Maps a single IP subnet across multiple DLCIs.
D. Resolves NBMA (non broadcast multi access) split horizon issues.
E. Requires use of the frame-relay map command.
F. None of the above
A. point-to-point
B. broadcast multi-access
C. nonbroadcast multipoint
D. nonbroadcast multi-access
E. broadcast point-to-multipoint
A. Each ISDN B channel has transmission speeds of up to 64 kbps.
B. The ISDN B channel can carry video, voice or data.
C. The ISDN B channel transmission rate varies depending on the service used.
D. The ISDN D channel transmits control information.
E. The ISDN B channels can be configured with different subnets and encapsulation types when dialer profiles are configured.
A. Legacy DDR can use port information to define interesting traffic.
B. Legacy DDR can configure multiple dialer configurations on the same interface.
C. Legacy DDR can use ACLs to define interesting traffic.
D. HDLC or PPP can be used to encapsulate ISDN D channel information.
E. The BRI interfaces on ISDN routers with dialer profiles configured cannot belong to multiple dialer pools.
F. Dialer profiles cannot use extended ACLs to define interesting traffic.
最新試題
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?（）
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.（）
A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? （）
Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?（）
Which of the following if addresses can be assigned to host devices?（）
The following access list was applied outbound on he E0 interface connected to the 192.168.1.8/29 LAN:access-list 123 deny tcp 192.168.1.8 0.0.0.7 eq 20 anyaccess-list 123 deny tcp 192.168.1.9 0.0.0.7 eq 21 anyWhat effect will this access list have?（）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）