The switched LAN is displayed below：
In this network， STP has been implemented. Switch SW1 is the root switch for the default VLAN.To reduce the broadcast domain， the network administrator decides to split users on the networkinto VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 rootprimary on switch SW1. What will happen as a result of this change？（）
A.Switch SW1 will change its spanning tree priority to become root for VLAN 2 only
B.All ports of the root switch SW1 will remain in forwarding mode throughout the reconvergenceof the spanning tree domain
C.No other switch in the network will be able to become root as long as switch SW1 is up andrunning
D.Switch SW1 will remain root for the default VLAN and will become root for VLAN 2
E.None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
The switched LAN is shown below：
Study the exhibit above carefully. Switch SW5 is configured as the root switch for VLAN 10 but notfor VLAN 20. If the STP configuration is correct， what will be true about Switch SW5？（）
A.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in standbymode
B.All ports will be in forwarding mode
C.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in blockingmode
D.All ports in VLAN 10 will be in forwarding mode
E.None of the other alternatives apply
A.IEEE 802.10
B.Misconfigured NIC
C.User configuration
D.IEEE 802.1Q
E.None of the other alternatives apply
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network.
Which three issues on Switch2 could be the cause？（）
A.Switch2 is configured for only VLAN1
B.Switch2 is a VTP server in a different domain
C.Switch2 is a VTP server in the Company domain
D.Switch2 is not a VTP domain.
E.Switch2 has a lower VTP configuration revision number than the current VTP revision
F.Switch2 has a higher VTP configuration revision number than the current VTP revision
A.Physical management of the switch
B.Logical management of the switch
C.In-band management of the switch
D.Out-of-band management of the switch
A.Reload the active VLAN configuration
B.Clear the affected port and bring it up again
C.Explicitly set the trunk for the VLAN to be on
D.Remove all the VLANs set
最新試題
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
Match the xDSL type on the above to the most appropriate implementation on the below.
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
In computer security， AAA stands for authentication， authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）