Refer to the exhibit. BGP has been configured on the routers in the network. However， the IBGPpeers in autonomous system 65200 have not converged. In addition， this console message wasgenerated on router R2：
*Mar 1 03：09：07.729： %TCP-6-BADAUTH No MD5 digest from 10.10.23.2（179） to10.10.23.3（11002）
On the basis of the information that is provided， what is the cause of the problem？（）
A.OSPF must be configured with the same MD5 authentication
B.BGP authentication can be used on iBGP peers when the connection is configured between theloopback interfaces
C.BGP authentication can be used on eBGP peers only
D.The password that is used for BGP authentication on both BGP peers in autonomous system65200 must be the same
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit diagram and configuration. RTB is summarizing its networks from AS 64100with the aggregate-address command. However， the show ip route command on RTA reveals theRTB individual networks as well as its summary route. Which option would ensure that only thesummary route would appear in the routing table of RTA？（）
A.Add a static route with a prefix of 192.168.24.0 255.255.252.0 pointing to the null0 interface
B.Create a route map permitting only the summary address
C.Delete the four network statements and leave only the aggregate-address statement in theBGP configuration
D.Add the keyword summary-only to the aggregate-address command
A.The network was originated via redistribution of an interior gateway protocol into BGP
B.The network was defined by a static route
C.The network was learned via IBGP
D.The network was learned via EBGP
E.The network was originated via a network or aggregate command
A.Route reflectors
B.Route maps
C.Route redistribution
D.Peer groups
E.Aggregate addresses
A.Configure weight
B.Enable route reflector
C.Create a distribute list
D.Enable the Longer Autonomous System path option
E.All of the above
A.Router （config-router）#network 154.2.1.0
B.outer （config-router）#network 164.2.1.0
C.Router （config-router）#network-advertise 154.2.1.0
D.Router （config-router）#network 154.2.1.0 mask 255.255.255.0
E.None of the other alternatives apply
最新試題
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
cisco ios command to interface dialer 0
Drag the DSL local loop topic on the left to the correct descriptions on the right.
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Drag the DSL technologies on the left to their maximum（down/up） data rate values on the below.
Study the exhibit carefully.Routers A and B are customer routers. Routers 1， 2， 3 and 4 are provider routers. The routers areoperating with various IOS versions. Which frame mode MPLS configuration statement is true？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）