A. Partitioning of network resources is enabled.
B. VRFs cannot support path isolation from MAN/WAN designs.
C. VRFs cannot be used to map a virtualized data center to a MPLS implementation.
D. VRFs do not allow for the use of application services with multiple access topologies.
E. An access design using a VRF allows for an aggregation layer service module solution.
您可能感興趣的試卷
你可能感興趣的試題
A. Troubleshooting is more complicated.
B. Service and switch modules are underutilized.
C. Layer 2 adjacency is required with the servers that use this design.
D. Layer 3 adjacency is required with the servers that use this design.
E. Load balancing will always occur across both access layer uplinks.
A. Summarize data center subnets.
B. Use passive interfaces to ensure appropriate adjacencies.
C. Tune the EIGRP timers to enable EIGRP to achieve quicker convergence.
D. Adjust the default bandwidth value to ensure proper bandwidth on all links.
E. Advertise a default summary route into the data center core from the aggregation layer.
A. Never use passive interfaces.
B. Use NSSA areas from the core down.
C. Use totally stub areas to stop type 3 LSAs.
D. Use the lowest Ethernet interface IP address as the router ID.
E. Tune OSPF timers to enable OSPF to achieve quicker convergence.
A. Server-to-server traffic always remains in the core layer.
B. The recommended practice is for the core infrastructure to be in Layer 3.
C. The boundary between Layer 2 and Layer 3 should be implemented in the aggregation layer.
D. The Cisco Express Forwarding hashing algorithm is the default, based on the IP address and Layer 4 port.
E. Core layer should run BGP along with an IGP becauseiBGP has a lower administrative distance than any IGP.
A.ASM
B.BiDirPIM
C.PIM-SMRP
D.RP-Switchover
E.SourceSpecificMulticast
最新試題
What is the recommended practice when considering VPN termination and firewall placement?（）
You are the Cisco Network Designer. Which of these is least important when determining how many users a NAS can support?（）
One of your customers wishes to use the NAS to perform DHCP functions and does not currently have a Layer 3 gateway in its production network. Which gateway mode is appropriate for this customer?（）
Which three of these are important when determining NAS Server scaling? （）
In which tunnel-less VPN topology do group members register with a key server in order to receive the security association necessary to communicate with the group?（）
One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?（）
Which of these is a benefit of using Network Admission Control instead of Cisco Identity Based Networking Services?（）
How many channels are defined in the IEEE 802.11b DSSS channel set?（）
During consultation, you find that a customer has multiple asset closets and will be adding more in the future. Which NAS physical deployment model would you suggest to this customer?（）
You are the Cisco Network Designer . Which is not major scaling, sizing, and performance consideration for an IPsec design?（）