A. map the Layer 2 VLAN number to the Layer 3 subnet
B. control route propagation to edge switches using distribute lists
C. use a Layer 2 distribution interconnection link with HSRP or GLBP
D. use a Layer 3 distribution interconnection link with HSRP or GLBP
E. use equal-cost Layer 3 load balancing on all links to limit the scope of queries in EIGRP
您可能感興趣的試卷
你可能感興趣的試題
A. It will only become active after a software failure.
B. It will only become active after a hardware failure.
C. It requires that Cisco NSF be enabled in order to work successfully.
D. It synchronizes the MAC, FIB, and adjacency tables between Active and Standby Route Processors.
A. Utilizing Cisco NSF in Layer 2 environments can reduce outages to one to three seconds.
B. Utilizing SSO in Layer 3 environments can reduce outages to one to three seconds.
C. Distribution switches are single points of failure causing outages for the end devices.
D. Utilizing Cisco NSF and SSO in a Layer 2 environment can reduce outages to less than one second.
E. NSF and SSO with redundant supervisors have the most impact on outages at the access layer.
A. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link
B. to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link
C. to two core switches from redundant distribution switches connected with a Layer 2 link
D. to two core switches from redundant distribution switches connected with a Layer 3 link
E. to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO
A. RX-queue deferred
B. TX-queue deferred
C. RX-queue saturation
D. TX-queue saturation
E. RX-queue starvation
F. TX-queue starvation
Which two practices will avoid Cisco Express Forwarding polarization?（）
A. The core layer should use default Layer 3 hash information.
B. The core layer should use default Layer 4 hash information.
C. The distribution layer should use default Layer 3 hash information.
D. The distribution layer should use default Layer 4 hash information.
E. The core layer should use Layer 3 and Layer 4 information as input to the Cisco Expressing Forwarding hashing algorithm.
F. The distribution layer should use Layer 3 and Layer 4 information as input into the Cisco Expressing Forwarding hashing algorithm.
最新試題
Client traffic is being bridged through LAN interfaces on two WLCs. Which roaming option will keep them on the same IP subnet?（）
Which technology allows centralized storage services to be shared across different VSANs?（）
What amount of cell overlap ensures smooth roaming for wireless endpoints?（）
Which two of these are advantages of placing the VPN device in the DMZ on the firewall?（）
The Cisco NAC Appliance is able to check which three items before allowing network access?（）
One of your customers wishes to use the NAS to perform DHCP functions and does not currently have a Layer 3 gateway in its production network. Which gateway mode is appropriate for this customer?（）
As an experienced technician, you are responsible for Technical Support. A customer calls to ask the best signal level and noise level for cell phone. How to respond?（）
Please match the Cisco STP enahancement term to its definition.（）(1) BPDU guard(2) PortFast(3) BackboneFast(4) Loop guard(5) Root guard(a) shuts down a port that receives a BPDU when enabled(b) cuts convergence time by mas-age for indirect failure(c) prevents the aliernate or root port from being designated in absence of BPDUs(d )causes Layer 2 LAN interface access port to immediately enter the forwarding state(e) helps prevent bridging loops due to jni-directional link failures on point-to-point links
Which of the following is the primary consideration to scale VPNs?（）
You are the Cisco Network Designer. Which of these is least important when determining how many users a NAS can support?（）