Given the following configuration：
port-profile type ethernet DATA-UPLINK
vmware port-group
switchport trunk allowed vlan 1-3967，4048-4093
channel-group auto mode on
no shutdown
state enabled
port-profile type ethernet MGMT-UPLINK
vmware port-group
switchport trunk allowed vlan 10-12
channel-group auto mode on
no shutdown
state enabled
VEMs are seen to be joining and then are lost from the Cisco VSM. How would you resolve this issue？（）
A. Remove second NIC from each port profile
B. Remove VEM from VSM （no vem X）， remove NICs， and reinsert
C. Ensure that VLANs on uplink profiles are not overlapping
D. Reinstall VEM
E. Issue the command "module vem X execute vemcmd set pinning module vsm 1"
您可能感興趣的試卷
你可能感興趣的試題
A. Send monitored traffic to a VLAN
B. Send monitored traffic to a remote VEM over L2
C. Receive monitored traffic on a vEthernet interface
D. Send monitored traffic to an IP destination
A. Source and destination interface must be on the same host
B. Source and destination interfaces can be on different hosts
C. Destination vEthernet interface can be on a different VLAN than the source
D. Destination interface can be a physical port
E. Destination interface cannot be a physical port
Given a host with two NICs assigned to a N1k profile，which topologies are suitable for this type of configuration （）
port-profile type Ethernet name VM-Data
vmware port-group
switchport mode trunk
switchport allowed vlan 400-410
channel-group auto mode active
no shut
state enabled
A. Cisco UCS fabric interconnects
B. Pair of N5K’s in VPC
C. Standalone N5K
D. Pair of N5K’s in non-VPC
E. Cisco Catalyst 6000 Switch in VSS
A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？ （）
VSM-PRI-188# sh int vethernet 5
Vethernet5 is up
Port description is VM001， Network Adapter 2
HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e）
Owner is VM "VM001"， adapter is Network Adapter 2
Active on module 5
VMware DVS port 484
Port-Profile is VM-vlan-10
Port mode is access
VSM-PRI-188# sh int vethernet 6
Vethernet6 is up
Port description is VM002， Network Adapter 1
HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020）
Owner is VM "VM002"， adapter is Network Adapter 1
Active on module 5
VMware DVS port 485
Port-Profile is VM-vlan-10
Port mode is access
A. Monitor session 1 type span Source interface veth5 both Destination interface veth6 No shut
B. monitor session 1 source vlan 10 destination interface veth6 no shut
C. monitor session 1 type er-span source interface vlan 10 destination ip 10.1.1.10 no shut
D. VM002 must be removed from the Nk1V
E. Move VM002 to Module 5
F. Restart the VEM on module 5
A. validates DHCP messages received from untrusted sources and filters out invalid response messages from DHCP servers
B. intercepts all ARP requests and responses on untrusted ports
C. builds and maintains the DHCP snooping binding database， which contains information about untrusted hosts with leased IP addresses
D. uses the DHCP snooping binding database to validate subsequent requests from untrusted hosts
E. limits IP traffic on an interface to only those sources that have an IP-MAC address binding table entry or static IP source entry
最新試題
Application Control Engine （ACE） can check the health of servers and server farms by configuring health probes （which are sometimes referred to as keepalives）. A probe can be one of many types. Which are valid ACE probes？ （）
In the event of a GSS failure in a GSS cluster， which is true？（）
Which of the following are supported in Cisco Global Site Selector？ （）
Which is true when describing a connection replication in Cisco ACE？（）
What would be the cause for the following fault in UCS Manager？（） "ether VIF x / xxx down， reason： ENM source pinning failed"
Which statement is true about "full state backup" in a Cisco Unified Computing System？（）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
Which statement is true regarding Backup tasks in Cisco UCS？（）
Server load balancing （SLB） is the process of deciding to which server a load-balancing device should send a client request for service. Which predictors are supported on ACE in order to select the best server to fulfill a client request？ （）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）