A.The VPNv6 address is a 96-bit route distinguisher and a 128-brt IPv6 address
B.The VPNv6 address is a 64-bit route distinguisher and a 128-bit IPv6 address
C.The VPNv6 address is a 64-brt route distinguisher and a 96-brt IPv6 address
D.The VPMv6 address is a 96-brt route distinguisher and a 96-bit IPv6 address
E.The VPNv6 address is a 128-bit route distinguisher and a 128-brt IPv6 address
您可能感興趣的試卷
你可能感興趣的試題
A.NAP and NSP provide secure access to corporate gateways without managing end-to-end PVCs.NAP and NSP use Layer 3 routing，Layer 2 Forwarding，or Layer 2 Tunneling Protocol tunnels.Hence，they can scale their business models for selling wholesale service
B.The NSP can oversubscribe by deploying idle and session timeouts using an industry standard RADIUS server for each subscriber
C.Only a single session per CPE on one virtual channel （VC).The username and password are configured on the CPE， so all users behind the CPE for that particular VC can access only one set ofservices. Users cannot select different sets of services， although using multiple VCs and establishing different PPP session on different VCs is possible
D.If a single IP address is provided to the CPE， and NAT or PAT is implemented，certain applications such as IPTV，which embed IP information in the payload， well not work. Additionally，if an IP subnet feature is used，an IP address also has to be reserved for the CPE
E.PPPoA can use the features on the Cisco Service Selection Gateway （SSG）
A.trunk admission control
B.forwarding traffic to tunnel
C.information distribution
D.path selection， calculation， and setup
E.traffic patterns prediction
A.MPLS is required between the PE and CE routers that connect the backbone carrier to the customer carrier.
B.The backbone carrier must enable the PE router to check that the packets it receives from the CErouter contain only the labels that the PE router advertised to the CE router.
C.Every packet that crosses the backbone carrier must be encapsulated so that the packet includes MPLS labels
D.AII PE routers that link the backbone carrier to the customer carrier must run Route Target Rewrite.
E.Arouting protocol is required between the PE and CE routers that connect the backbone carrierto thecustomer carrier. The routing protocol enables the customer carrier to exchange IGP routing information with the backbone carrier.
A.immediately after receiving the first packet on the shared tree for a given （S，G）
B.after receiving over 1 kb/s traffic onthe shared tree for a given （S，G）
C.10 seconds after receiving the first packet on the shared tree for a given （S，G）
D.30 seconds after receiving the first packet on the shared tree for a given （S，G）
E.after receiving over 10 kb/s traffic onthe shared tree for a given （S，G）
A.MAC over MPLS
B.L2TPV3
C.802.1 QinQ
D.Ethernet over MPLS
E.GRE
最新試題
Which information is carried in the OSPFv3 intra-area Prefix LSA？（）
What is the BGP synchronization rule？（）
In optical transmission systems， chirped lasers are used for the purpose of：（）.
All secure domain routers （SDRs） have shared attribute and resources. Which three resources are sharedall SDRs？ （）
What layer of the TMN （telecommunications management network） model does CTM fit into？（）
There are two cabling schemes to choose from when implementing a Cisco CRS-1 multishelf system：single-module cabling and multimodule cabling. What is the maximum capacity of the LCCs that aresupported in multimodule cabling？（）
Which statement about VPLS is true？（）
Which three protocols use TLVs to carry attributes？（）
Which Modular QoS CLI （MQC） based output queuing method is designed to support multiple trafficclasses including VoIP traffic， mission-critical traffic， interactive traffic， and default class traffic？（）
Which tree of these are types of Ethernet Virtue Connections （EVCs） in the MEF concept？（）