Refer to the exhibit.From the MAC addresses shown in the command output,to which two ports is the multicast stream 225.230.57.199 being forwarded on this switch?()
A.Fa6/28
B.Fa7/20
C.Gi3/7
D.Fa4/2
E.Fa4/14
F.Fa4/38
G.Fa6/38
H.Fa5/7
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. When applying this hierarchical policy map on the on the tunnel1 interface, you measure high jitter for traffic going through class 1234. What is the most likely cause of this jitter?()
A.The configuration of a hierarchical policy map on a tunnel interface is not supported.
B.Class 5555 and class 5554 are both taking up 100% of the bandwidth,leaving nothing for class 1234.
C.The burst size for the traffic shaping is wrongly configured to 15000;this would require an interface capable of sending at 150Mb/s.
D.The burst size for the traffic shaping has been wrongly configured;it should be set as low as possible.
E.The burst size for the traffic shaping has been wrongly configured;it should be set as high as possible.
A.data marked with DSCP AF21,VOIP marked with DSCP EF
B.data marked with DSCP AF51,VOIP marked with DSCP EF
C.data marked with the DE-bit,VOIP marked with the CLP-bit
D.data marked with DSCP EF,VOIP marked with DSCP AF31
E.data marked with IP precedence 5 VOIP marked with DSCP EF
A.mark VOIP traffic with IP precedence 6 and configure only ’fair-queue’ on the links
B.configure the scheduler allocate 3000 1000 command to allow the QoS code to have enough CPU cycles
C.enable class-based traffic shaping on the VoIP traffic class
D.enable Layer 2 fragmentation and interleaving on the links
E.enable Frame Relay on the links and send voice and data on different Frame Relay PVCs
最新試題
The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?()
一堆交換機(jī)一個server、一個transpare,問配置prune在哪里配置?
兩ebgp鄰居發(fā)路由過來 ,哪些屬性重置?
Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()
What is the three main step of using the QoS feature with MQC command line interface?
The Frame Relay network in the diagram is not functioning properly.What is the cause of the problem?()
Local Preference?
hsrp speak狀態(tài)是什么意思?
A default Frame Relay WAN is classified as what type of physical network?()
Refer to the exhibit.Which statement describes DLCI 17?()