單項選擇題Users on the 192.168.1.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server()。

A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which command shows if an access list is assigned to an interface?()

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

2.多項選擇題Which two devices can interfere with the operation of a wireless network because they operate on similar frequencies? ()

A.copier
B.microwave oven
C.toaster
D.cordless phone
E.IP phone
F.AM radio

3.單項選擇題If the router R1 has a packet with a destination address 192.168.1.255, what describes the operation of the network()。

A.R1 will forward the packet out all interfaces.
B.R1 will drop this packet because this it is not a valid IP address.
C.As R1 forwards the frame containing this packet, Sw-A will add 192.168.1.255 to its MAC table.
D.R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF
E.As R1 forwards the frame containing this packet, Sw-A will forward it to the device assigned the IP address of 192.168.1.255.

4.單項選擇題A host is attempting to send data to another host on a different network. What is the first action that the sending host will take?()

A.Drop the data.
B.Send the data frames to the default gateway.
C.Create an ARP request to get a MAC address for the receiving host.
D.Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.

5.單項選擇題

Refer to the exhibit.The Lakside Company has the internetwork in the exhibit.The administrator would liketo reduce the size of routing table on the Central router.Which partial routing table entry in the Central routerepresents a route summary that represents the vlans in Phoenix but no additional subnets?()

A.10.0.0.0/22 is subnetted,1 subnets D  10.4.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
B.10.0.0.0/28 is subnetted,1 subnets D 10.2.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
C.10.0.0.0/22 is subnetted,1 subnets D 10.0.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
D.10.0.0.0/30 is subnetted,1 subnets D 10.2.2.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
E.10.0.0.0/28 is subnetted,1 subnets D 10.4.4.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
F.10.0.0.0/30 is subnetted,1 subnets D 10.4.4.4[90/20514560] via 10.2.0.2,6w0d,serial0/1

最新試題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:單項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()

題型:單項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題