單項選擇題

As a network administrator,you have been instructed to prevent all traffic or iginating on the LAN from entering the R2 router.Which the following command would implement the access list on the interface of theR2 router?()

A.access-list 101 in
B.access-list 101 out
C.ipaccess-group 101 in
D.ipaccess-group 101 out


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

S0/0 on R1 is configured as a multipoint interface to communicate with R2 and R3 in the hub-and-spoke Frame Relay topology shown in the exhibit. Originally, static routes were configured between these routers to successfully route traffic between the attached networks. What will need to be done in order to use RIPv2 in place of the static routes?()

A.Configure the no ip subnet-zero command on R1, R2, and R3.
B.Dynamic routing protocols such as RIPv2 cannot be used across Frame Relay networks.
C.Configure the S0/0 interface on R1 as two subinterfaces and configure point-to-point links to R2 and R3.
D.Change the 172.16.2.0/25 and 172.16.2.128/25 subnetworks so that at least two bits are borrowed from the last octet.
E.Change the network address configuration to eliminate the discontiguous 172.16.2.0/25 and 172.16.2.128/25 subnetwork.

3.單項選擇題What value is primarily used to determine which port becomes the root port on each nonroot switch in a spanning-treetopology?()

A.lowest port MAC address
B.port priority number and MAC address.
C.VTP revision number
D.highest port priority number.
E.pathcost

4.單項選擇題A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5.What command should be issued to accomplish this task?()

A.access-list 101 deny tcp192.168.1.1280.0.0.15192.168.1.50.0.0.0eq23 access-list 101 permit ip any any
B.access-list 101 deny tcp192.168.1.1280.0.0.240192.168.1.50.0.0.0eq23 access-list101permit ip any any
C.access-list 1 deny tcp192.168.1.1280.0.0.255192.168.1.50.0.0.0eq21 access-list1permit ip any any
D.access-list 1 deny tcp192.168.1.1280.0.0.15host192.168.1.5eq23 access-list1permit ip any any

5.單項選擇題

一個網絡管理員配置了兩臺交換機London和Madrid,讓它們使用VTP。但是,兩臺交換機之間沒有共享VTP信息,根據下圖,回答交換機之間沒有分享VTP信息的原因是()。

A.VTP版本配置錯誤
B.VTP工作模式配置錯誤
C.VTP域名配置錯誤
D.VTP的pruning mode被禁止了
E.VTP的V2 mode被禁止了
F.VTPtraps generation被禁止了

最新試題

請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()

題型:多項選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:?jiǎn)雾?xiàng)選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:?jiǎn)雾?xiàng)選擇題

路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()

題型:?jiǎn)雾?xiàng)選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:?jiǎn)雾?xiàng)選擇題