A.to prevent unauthorized Telnet access to a switch port
B.to limit the number of Layer 2 broadcasts on a particular switch port
C.to prevent unauthorized hosts from accessing the LAN
D.to protect the IP and MAC address of the switch and associated ports
E.to block unauthorized access to the switch management interfaces over common TCP ports
您可能感興趣的試卷
你可能感興趣的試題
A.a switch with a trunk link that is configured between the switches
B.a router with an IP address on the physical interface that is connected to the switch
C.a switch with an access link that is configured between the switches
D.a router with subinterfaces configured on the physical interface that is connected to the switch
A.Flash,TFTPserver,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTPserver
D.NVRAM,TFTPserver,ROM
E.TFTPserver,F(xiàn)lash,NVRAM
根據下圖,Switch1剛剛完成重啟,并完成上電自檢。HostA發送它的第一個偵到HostC,交換機首先會對switching table做什么操作()
A.Switch1會添加192.168.23.4到switchingtable
B.Switch1添加192.168.23.12到switchingtable
C.Switch1添加000A 8A47.E612到switchingtable
D.Switch1添加000B DB95.2EE9到switchingtable
A.IR
B.DSSS
C.FHSS
D.DSSS and FHSS
E.IR,F(xiàn)HSS,and DSSS
A.permit all packets matching the first three octets of the source address to all destinations
B.permit all packets matching the last octet of the destination address and accept all source addresses
C.permit all packets from the third subnet of the network address to all destinations
D.permit all packets matching the host bits in the source address to all destinations
E.permit all packets to destinations matching the first three octets in the destination address
最新試題
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
何時必須使用clock rate 命令配置路由器串行接口?()
OSI 哪一層可提供有序的數據重構服務?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()