A.拒絕服務
B.強制疊加
C.監聽
D.木馬
您可能感興趣的試卷
你可能感興趣的試題
A.The address is abroadcast address.
B.The Ehernet interface is faulty.
C.VLSM-capable routing protocols must be enable first on the router.
D.This address is a network address.
A.to confine network instability to single areas of the network
B.to reduce the complexity of router configuration
C.to speed up convergence
D.to lower costs by replacing router swith distribution layer switches
E.to decrease latency by increasing bandwidth
F.to reduce routing overhead
根據下圖,WLANdiagram決定了哪兩個事實?()
A.兩個cells的overlap的區域描述了一個basic service set
B.網絡描述了一個extended service set
C.再每個CELL中的AP必須被配置成使用channel 1
D.為了確保連通性,重疊區域必須小于10%
E.兩個訪問點應該被配置成工作在不同的頻道
A.RIPV1 and OSPF are classless routing protocols.
B.Classful routing protocols send the subnet mask in routing updates.
C.Automatic summarization at classful boundaries can cause problems on disc……
D.EIGRP and OSPF are classful routing protocols and summarize routes by def……
根據下圖,圖中的拓撲中存在多少個廣播域?()
A.1
B.2
C.3
D.4
E.5
F.6
最新試題
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中需要多少個邏輯地址范圍?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中存在多少個廣播域?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()