單項選擇題Which IPsec security protocol should be used when confidentiality is required?()

A.AH
B.MB5
C.PSK
D.ESP


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two subnetworks would be included in the summarized address of 172.31.80.0 /20? ()

A.172.31.17.4 /30
B.172.31.51.16 /30
C.172.31.64.0 /18
D.172.31.80.0 /22
E.172.31.92.0 /22
F.172.31.192.0 /18

2.單項選擇題Which command can you use to manually assign a static IPV6 address to a router interface?()

A.ipv6 address PREFIX_1::1/64
B.ipv6 autoconfig 2001:db8:2222:7272::72/64
C.ipv6 autoconfig
D.ipv6 address 2001:db8:2222:7272::72/64

3.多項選擇題For what two purposes does the Ethernet protocol use physical addresses? ()

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30

4.多項選擇題

What can be determined from the line of show ip route output shown in the exhibit?()

A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.

5.單項選擇題使配置的訪問列表應用到接口上的命令是什么?()

A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound

最新試題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()

題型:單項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

要將數據包發(fā)送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。當計算機A 向計算機D 發(fā)送幀時,哪些計算機會接收該幀?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題