A.stop the winch just before the craft reaches the final stowage position
B.limit the amount of cable on the drum
C.limit the ascent rate
D.stop the winch in case the craft weighs too much
您可能感興趣的試卷
你可能感興趣的試題
A.by turning the globe clockwise
B.by a switch at each light
C.by a light sensor
D.automatically when the raft is inflated
A.automatically as the liferaft inflates
B.with a switch near the boarding handle
C.at night because the light has a photosensitive switch
D.by screwing the bulb in after the raft is inflated
A.replaced annually
B.tested monthly
C.serviced annually
D.overhauled quarterly
A.examining the Certificate of Inspection
B.examining the plate on the outside of the raft container
C.referring to the station bill
D.referring to the shipping articles
A.serves as a sea painter
B.detaches from the liferaft automatically
C.is used to rig the boarding ladder
D.is cut immediately as it is of no further use
最新試題
The operating cord on an inflatable liferaft also serves as a（）.
The air spaces in the floor of an inflatable liferaft will provide protection against（）.
The bosun has thrown the liferaft into the water before abandoning the vessel. The operating cord（）.
Signaling devices which are required on inflatable liferafts include（）.
Inflatable liferafts shall be serviced at an approved servicing facility every 12 months or not later than the next vessel inspection for certification. However，the total elapsed time between servicing cannot exceed（）.
As a vessel sinks to a depth of 15 feet，the hydrostatic trip releases the liferaft container from its cradle by（）.
If an inflatable liferaft inflates upside down，you can right it by（）.
If an inflatable liferaft is to be released manually，where should the operating cord be attached before throwing the raft overboard?（）
The inside light in an inflatable liferaft is turned on（）.
Each lifebuoy shall be marked in block capitals of the Roman alphabet with（）of the ship.