A.Personnel may work beneath suspended loads，as long as they are alert and wear hard hats
B.If a suspended load with no tag begins to spin，personnel should attempt to stop the spinning if the load is within reach
C.If tag lines are used to control a suspended load，they should be secured to the deck
D.Personnel not involved in the hoisting operation should be kept clear of the transfer area
您可能感興趣的試卷
你可能感興趣的試題
A.selected
B.collected
C.detected
D.effected
A.act of God
B.lock-out
C.strike
D.paint fire
A.Aid in casting off
B.Direct the drift of the vessel
C.Aid in its recovery
D.Maintain maximum resistance to broaching
A.outboard strake of plating on each side of an innerbottom
B.outer strake of plating on each side of the main deck of a vessel
C.plate which sits atop the center vertical keel
D.uppermost continuous strake of plating on the shell of a vessel
A.Repairer
B.Customer
C.charterer
D.carrier
最新試題
You are operating a lift boat.When beginning to jack down you should（）.
When a line is spirally coiled about its end and lying flat on deck，it is said to be（）.
The process of lowering a boom to a horizontal position and onto its deck support is called（）.
The Repairer shall be relieved of all obligations under these terms and conditions caused by such all following matters except（）.
The vessel or other goods upon which the Works have been carried out must be（）from the Repairer’s worksite within 3 days after the invoice date or in accordance with other written notification by the Repairer to the Customer.
When lowering lifeboats in heavy seas，a good practice is to rig frapping lines（）.
The usual method of arranging a line on deck so that it will run out easily without kinking or fouling is（）.
You must ensure that lifesaving equipment is（）.
The minimum length of a boat painter for a lifeboat in ocean service is（）.
The margin plate is the（）.