A.higher efficiency of the gear train while reversing
B.the higher gear ratio
C.the multi-start feature
D.higher recovering speed
您可能感興趣的試卷
你可能感興趣的試題
A.lower；igher
B.maximum；higher
C.predetermined minimum；higher
D.predetermined maximum；lower
A.becomes slack
B.can not be paid out unless the brake is overhauled or recover wire unless manually operated
C.will be let out because the brake is out of work
D.may be pay out due to no power
A.After
B.before
C.inside
D.outside
A.lower
B.higher
C.low
D.high
A.Water is heated into vapor on heating surfaces
B.Water is vaporized by pressure difference
C.There are no heating-transfer surfaces
D.There are more heating-transfer surfaces
最新試題
The condensers located in various stages of a flash evaporator are cooled by（）
（）are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
（） is not installed on the main switchboar.
To proceed to the assistance of a ship in distress is（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The main purpose of port State control is not to（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）