A.the sinking of tail shaft
B.the clearance of stern bearing
C.the total flexure of both end bearing
D.main engine crankshaft deflection
您可能感興趣的試卷
你可能感興趣的試題
A.the repair standard of main docking repair item
B.the special tool for repair item
C.the skill of repairer
D.the status of docking repair equipment
A.making the repair list, booking spare parts and special tools for the dock repair
B.shutting off all of the SW valves to outboard
C.the sketches or diagrams used for the dock repair
D.cleaning up the oil tank and boiler before enter the dock
A.the SW outboard valves
B.the tailshaft LO stop valve
C.the drain valve of the boiler
D.propeller shaft sealing device
A.sea valve chest, sect valve, thruster
B.bilge motherboard, steering and the shaft system
C.sea water system
D.fresh water system
We should apply for annual spare parts according to（）
Ⅰ.he need of annual overhaul
Ⅱ.he storage of spare parts
Ⅲ.he storage capacity of spare parts room
A.Ⅰ
B.Ⅱ
C.Ⅰ+Ⅱ
D.Ⅲ
最新試題
To proceed to the assistance of a ship in distress is（）
Cold weather starting of a diesel engine may be made easier by（）
The cetane rating of diesel fuel is an indication of the （）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The condensers located in various stages of a flash evaporator are cooled by（）
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Using a file without a handle may result in （）
If separating effect is not good, which measure should be taken （）
The treatment of the fuel oils involves storage, heating, filtering and（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish