A.overspeed；overload
B.overload；overspeed
C.over mechanical load；over thermal load
D.over torque；overspeed
您可能感興趣的試卷
你可能感興趣的試題
A.to work as overload characteristic
B.overspeed
C.over mechanical load only
D.over thermal load only
A.Class A
B.Class B
C.Class C
D.Class D
A.being given
B.giving
C.supplying
D.being supplied
A.MARPOL Annex Ⅲ
B.MARPOL Annex Ⅵ
C.MARPOL Annex Ⅴ
D.MARPOL Annex Ⅳ
A.the International Convention for the Safety of the Life at Sea
B.the International Convention for the Prevention from ships
C.the International Convention on control of harmful anti-fouling system on ships
D.the International Convention for the Control and Management of Ship’s Ballast Water and Sediments
最新試題
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
The condensers located in various stages of a flash evaporator are cooled by（）
If separating effect is not good, which measure should be taken （）
Engine parameters shall be corresponded to NOx Technical Files. This is required by （）
The cetane rating of diesel fuel is an indication of the （）
Under MARPOL Code the ship to which it applies has to carry （）
The ISPS Code consists of a mandatory section-Part A, which shows（）