A.fuel oil pump will over-speed if dirt is not removed
B.fuel oil transfer pumps cannot tolerate small amounts of grit in the oil
C.fuel injectors may be damaged by foreign particles in the fuel oil dirty
D.fuel will clog the intake air filter
您可能感興趣的試卷
你可能感興趣的試題
A.The viscosity off the fuel
B.The quantity of water to be removed from the fuel
C.The specific gravity of the fuel
D.The quantity of dirt to be removed from the fuel
A.oil has a tendency to emulsify in the bowl
B.purifier will act as a clarifier at the discharge ring
C.oil will be lost through the water discharge ports
D.oil solids will be deposited only at the intermediate top disk
A.more sealing water is needed
B.the cover clamp needs tightening
C.the purifier has a bad vibration when started
D.water is discharged from the overflow line
A.remove the discharge ring
B.re-prime the purifier
C.the centrifuge to its proper speed
D.install an additional discharge ring
A.flattening of the bowl neoprene O-rings
B.operation within the explosive rang of the fuel
C.excessive purifier operating pressures
D.excessive oil viscosity
最新試題
Using a file without a handle may result in （）
（）connectors hold best if a wire is accidentally pulled or a connection becomes loose.
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?（）
Which of the following items don’t belong to dock repair works?（）
Which one is NOT the ‘clear grounds’ for a more detailed inspection?（）
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
The condensers located in various stages of a flash evaporator are cooled by（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish