A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances
您可能感興趣的試卷
你可能感興趣的試題
A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear
A.reduce load
B.check your exhaust
C.adjust cooling water temperature
D.increase lube oil flow
A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced
A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed
A.electrical overload
B.surging at governed RPM
C.loose engine mounting bolts
D.coolant leaking into the cylinder
最新試題
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a（）
Flame failure in an automatically fired auxiliary boiler can from a/an （）
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?（）
Under MARPOL Code the ship to which it applies has to carry （）
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
To shut down a diesel engine after it exceeds the set maximum speed，which type of device listed should be used?（）
Diesel engine air start system check valves are opened by （）
The ISPS Code consists of a mandatory section-Part A, which shows（）
The main purpose of port State control is not to（）
During the diesel engine running, the water level of F.W expansion tank should normally kept in the （） level of glass tube.